| Titel: | Brain / iKon / Xbar / TracX App iOS 3.2.054 |
| Besturingssystemen: |
|
| Licentie: | Commercial |
| Datum toegevoegd: | 11-03-2024 |
| Uitgever: | MSH Electronics Srl |
| Beoordeling: | Download applicatie om te beoordelen! |
| Log wijzigingen: |
IMPORTANT NOTE: Immediately after the update, go to panel 7 of the Wizard and check that your swashplate is selected (or if in panel 8 of the wizard appear the message “SWASHPLATE NOT SELECTED”). IF ANY SWASHPLATE IS SELECTED: Select the correct kind of swashplate used on your model (a unit power cycle can be required), then check that swashplate movements are correct. If swashplate movement are not correct go into the panel 8 and: Check that SRV-1 of the top left displayed swashplate is connected to SRV1 input of the unit, SRV-2 in to the SRV2 input and SRV-3 in to the SRV3 input. If required, correct swashplate movements with “Servo Reverse” button. • Wizard: moved panel 9 “Unit Orientation” to panel 2, all other panels are scaled by one position • Added further controls for the swashplate displayed as selected in panel 7 of the Wizard • Added message “SWASHPLATE NOT SELECTED” in panel 8 of the Wizard if swashplate was not correctly done • Now it is possible to log also values of Z-Acceleration, X-Acceleration and Y-Acceleration (in G units) • Added in parameters that can be managed with Jeti telemetry Z-Acceleration, X-Acceleration and Y-Acceleration • From this version it is officially added the decoding of new Spektrum SRXLv2 protocol used by Spektrum for their new receivers (for now only SPM4650) selecting the “HoTT/SUMD/UDI/Xbus-B/SRXLv2/Mpx-SRXL(oldest Spektrum rx)” icon / protocol with possible physical redundancy using 1/2 DSMX satellites • Checkbox “Spektrum Bind” to put by software RX/SAT in to bind mode, now work also when Spektrum SRXv2 protocol is selected • Wizard panel 9 & ADVANCED, Tab Common, Receiver: now when the Tail Gain checkbox "Is set in Software" was selected (or unselected), the radio channels for “Tail Gain” and "Setup Selection" are automatically exchanged between them • Introduced a further improvement in current measurement with Hobbywing ESC’s • Updated version of JETI integration file brain.bin inside the downloadable “Brain2Jeti.zip” file with all the recent firmware and software changes • Renamed the JETI integration file under “Help” menu and on the server from “Brain.zip” to “Brain2Jeti.zip” • New version of FRSKY script file for integration Brain2.luac inside the downloadable Brain2FrSky.zip file • Simplified, optimized and speeded the code and greatly reduced the total size of the precompiled FrSky LUAC script to leave the RAM space for other little LUA script running in background. • Now external sensors connected on the FrSky Smart.Port bus no more freeze the FrSky Integration • Now FrSky Integration during the use, no longer generates the tedious messages of "Telemetry lost" • Now the FrSky Integration doesn’t hang when particular values are read or written • Revised some FrSky Integration menu • Improved the “Tail Motor driven” routines for Micro Brain2 now selectable also via Integrations • Added a control of maximum number of characters inserted in the NAME and PIN fields of “Configure Bluetooth” window • Revised length of fields of NAME and PIN in the “Configure Bluetooth” window • Added Spanish instructions selectable under Language menu • Revised French instructions • New version of README_for_ESC_datas_log_and_telemetry.pdf document • New version of README_for_OpenTX_Integration.pdf document • New version of README_for_Jeti_integration_for_BRAIN.pdf document • In Panel 8 of the Wizard increased the maximum values imputable in CYCLIC and PITCH fields for particular Heli Models with particular swashplate geometry where the servo harms cannot increase (EG: Gaui X3) • Revised the Framerate calculation for FrSky S.Bus (1 not 2) that has a framerate different (9ms) from the official Futaba S.Bus framerates standard (7ms or 14ms) • DIAGNOSTIC section, “Real Time” tab: moved buttons over values • DIAGNOSTIC section, “Recorded Logs” tab: moved buttons over values [More] |
Schermafbeeldingen (Klik om te vergroten)
25-11-2024
|
Zoom 6.2.11.50939 |
25-11-2024
|
TunePat YouTube Music Converter 2.5.2 |
25-11-2024
|
TunePat YouTube Music Converter for MAC 2.5.3 |
25-11-2024
|
ChequeSystem Electronic Cheque Writer 8.4.3 |
25-11-2024
|
YT Downloader 9.11.2 |
Veilige en gratis downloads, gecontroleerd door UpdateStar
Nu kopen
App Store
App Store
Blijf actueel
met UpdateStar freeware.
met UpdateStar freeware.
| 21-11-2024 | US government wants Google to sell the Chrome browser |
| 20-11-2024 | 7-Zip update fixes vulnerability |
| 20-11-2024 | Why use a VPN service in 2025? |
| 13-11-2024 | Adobe October 2024 Patch Day |
| 05-11-2024 | Crowdstrike Strikes Again: Office Crashes, Windows 11 Stalls |
Recente beoordelingen
|
cyberJack DriverPackage
Verbeter uw cyberbeveiliging met cyberJack DriverPackage! |
|
|
searchpoweronline
Breng een revolutie teweeg in uw online zoekopdrachten met SearchPowerOnline! |
|
|
Paradox Launcher
Beheer uw Paradox Interactive-spellen met gemak met behulp van de Paradox Launcher! |
|
|
Autodesk Advanced Material Library Base Resolution Image Library 2019
Breng een revolutie teweeg in uw ontwerpen met de verbeterde materiaalbibliotheek in de geavanceerde materiaalbibliotheek van Autodesk Base Resolution Image Library 2019 |
|
|
XPrinter Driver version
XPrinter Driver-versie: Efficiënte afdrukoplossingen voor ZhuHai J-Speed technology Co., ltd |
|
|
WPTx64
Verbeter uw Windows-prestaties met WPTx64 van Microsoft |
UpdateStar Premium Edition
Google Chrome
Microsoft Edge
Microsoft Visual C++ 2015 Redistributable Package
Microsoft Edge WebView2 Runtime
Microsoft Visual C++ 2010 Redistributable
