Brain / iKon / Xbar / TracX App iOS 3.2.054

Brain / iKon / Xbar / TracX App iOS 3.2.054

MSH Electronics Srl – Commercial – iOS
z 30 głosów
Najnowsza wersja
App iOS 3.2.054
Sejf do zainstalowania
Tytuł: Brain / iKon / Xbar / TracX App iOS 3.2.054
Systemy operacyjne:
  • iOS
Licencja: Commercial
Data dodania: 11.03.2024
Wydawca: MSH Electronics Srl
Ocena: Pobierz klienta, aby ocenić!
Lista zmian IMPORTANT NOTE: Immediately after the update, go to panel 7 of the Wizard and check that your swashplate is selected (or if in panel 8 of the wizard appear the message “SWASHPLATE NOT SELECTED”). IF ANY SWASHPLATE IS SELECTED: Select the correct kind of swashplate used on your model (a unit power cycle can be required), then check that swashplate movements are correct. If swashplate movement are not correct go into the panel 8 and:

Check that SRV-1 of the top left displayed swashplate is connected to SRV1 input of the unit, SRV-2 in to the SRV2 input and SRV-3 in to the SRV3 input.
If required, correct swashplate movements with “Servo Reverse” button.

• Wizard: moved panel 9 “Unit Orientation” to panel 2, all other panels are scaled by one position
• Added further controls for the swashplate displayed as selected in panel 7 of the Wizard
• Added message “SWASHPLATE NOT SELECTED” in panel 8 of the Wizard if swashplate was not correctly done
• Now it is possible to log also values of Z-Acceleration, X-Acceleration and Y-Acceleration (in G units)
• Added in parameters that can be managed with Jeti telemetry Z-Acceleration, X-Acceleration and Y-Acceleration
• From this version it is officially added the decoding of new Spektrum SRXLv2 protocol used by Spektrum for their new receivers (for now only SPM4650) selecting the “HoTT/SUMD/UDI/Xbus-B/SRXLv2/Mpx-SRXL(oldest Spektrum rx)” icon / protocol with possible physical redundancy using 1/2 DSMX satellites
• Checkbox “Spektrum Bind” to put by software RX/SAT in to bind mode, now work also when Spektrum SRXv2 protocol is selected
• Wizard panel 9 & ADVANCED, Tab Common, Receiver: now when the Tail Gain checkbox "Is set in Software" was selected (or unselected), the radio channels for “Tail Gain” and "Setup Selection" are automatically exchanged between them
• Introduced a further improvement in current measurement with Hobbywing ESC’s
• Updated version of JETI integration file brain.bin inside the downloadable “Brain2Jeti.zip” file with all the recent firmware and software changes
• Renamed the JETI integration file under “Help” menu and on the server from “Brain.zip” to “Brain2Jeti.zip”
• New version of FRSKY script file for integration Brain2.luac inside the downloadable Brain2FrSky.zip file
• Simplified, optimized and speeded the code and greatly reduced the total size of the precompiled FrSky LUAC script to leave the RAM space for other little LUA script running in background.
• Now external sensors connected on the FrSky Smart.Port bus no more freeze the FrSky Integration
• Now FrSky Integration during the use, no longer generates the tedious messages of "Telemetry lost"
• Now the FrSky Integration doesn’t hang when particular values are read or written
• Revised some FrSky Integration menu
• Improved the “Tail Motor driven” routines for Micro Brain2 now selectable also via Integrations
• Added a control of maximum number of characters inserted in the NAME and PIN fields of “Configure Bluetooth” window
• Revised length of fields of NAME and PIN in the “Configure Bluetooth” window
• Added Spanish instructions selectable under Language menu
• Revised French instructions
• New version of README_for_ESC_datas_log_and_telemetry.pdf document
• New version of README_for_OpenTX_Integration.pdf document
• New version of README_for_Jeti_integration_for_BRAIN.pdf document
• In Panel 8 of the Wizard increased the maximum values imputable in CYCLIC and PITCH fields for particular Heli Models with particular swashplate geometry where the servo harms cannot increase (EG: Gaui X3)
• Revised the Framerate calculation for FrSky S.Bus (1 not 2) that has a framerate different (9ms) from the official Futaba S.Bus framerates standard (7ms or 14ms)
• DIAGNOSTIC section, “Real Time” tab: moved buttons over values
• DIAGNOSTIC section, “Recorded Logs” tab: moved buttons over values
[More]

Zrzuty ekranu (kliknij aby obejrzeć powiększenie)

Powiązane produkty


axiim Link

Review of Axiim Link by Axiim Inc Axiim Link is an innovative wireless audio solution developed by Axiim Inc, designed to streamline multi-room audio experiences while delivering high-fidelity sound.

Hammond Airshow

The 2023 Hammond Northshore Regional Airshow promises to be an exciting event for attendees. For those planning to attend, downloading the mobile app can enhance your experience, providing detailed information about upcoming attractions …

Tencent JETJAT

This application enables users to remotely control a four-axis aircraft (model airplane) using an iOS device (iPhone/iPad).

TPCA Cornhole

This application facilitates scoring for standard cornhole games utilizing the terminology established by the Tennessee Professional Cornhole Association (TPCA).

Ostatnie aktualizacje


Acronis True Image 2015 for PC and Mac 2.6571

Acronis True Image 2015: A Comprehensive Backup Solution for PC and Mac Acronis True Image 2015, developed by Acronis, LLC, is a versatile backup software designed for both PC and Mac users.

3D Youtube Downloader 1.22.2

Editor's Review: 3D Youtube Downloader by 3DYD Soft 3D Youtube Downloader by 3DYD Soft is a powerful software application that allows users to easily download videos from YouTube in various formats and qualities.

StreamFab (x64) 6.2.2.6

StreamFab (x64) Review StreamFab (x64) is a powerful software application developed by DVDFab Software Inc. It is designed to provide users with a seamless streaming experience for their favorite movies and TV shows.

Ultimaker Cura 5.10.0

Ultimaker Cura to bezpłatne oprogramowanie do krojenia o otwartym kodzie źródłowym używane do drukowania 3D. Opracowany i utrzymywany przez Ultimaker, jest kompatybilny z szeroką gamą drukarek 3D, co czyni go ulubieńcem zarówno …
Darmowe bezpieczne pobieranie plików sprawdzonych przez UpdateStar

Kup teraz!
App Store
Bądź na bieżąco
z UpdateStar freeware.

Najnowsze recenzje

Stellar Data Recovery Standard Stellar Data Recovery Standard
Odzyskaj utracone pliki za pomocą Stellar Data Recovery Standard
Signal Signal
Pozostań w kontakcie prywatnie i bezpiecznie dzięki Signal Messenger
Ashampoo Driver Updater Ashampoo Driver Updater
Bez wysiłku aktualizuj sterowniki za pomocą Ashampoo Driver Updater.
LAV Filters LAV Filters
Ulepsz swoje wrażenia multimedialne dzięki filtrom LAV.
S Spyware Terminator
Skuteczna ochrona przed oprogramowaniem szpiegującym dzięki przyjaznym dla użytkownika funkcjom
S SmartSync Pro
Bezproblemowa synchronizacja z SmartSync Pro
UpdateStar Premium Edition UpdateStar Premium Edition
Aktualizowanie oprogramowania nigdy nie było łatwiejsze dzięki UpdateStar Premium Edition!
Microsoft Visual C++ 2015 Redistributable Package Microsoft Visual C++ 2015 Redistributable Package
Zwiększ wydajność swojego systemu dzięki pakietowi redystrybucyjnemu Microsoft Visual C++ 2015!
Microsoft Edge Microsoft Edge
Nowy standard przeglądania stron internetowych
Google Chrome Google Chrome
Szybka i wszechstronna przeglądarka internetowa
Microsoft Visual C++ 2010 Redistributable Microsoft Visual C++ 2010 Redistributable
Niezbędny składnik do uruchamiania aplikacji Visual C++
Microsoft Update Health Tools Microsoft Update Health Tools
Microsoft Update Health Tools: Upewnij się, że Twój system jest zawsze aktualny!